Cconcrete stationary pump

1. Before start pumping, the operator of the hose should communicate well with the person who opened the pump. The bending radius of the front hose should be greater than 1m. The operator is not allowed to stand at the outlet of the pipe to prevent the concrete material from suddenly spraying and hurting people.

2. The hose of the concrete mixing pump should be fixed and padded. It is strictly forbidden to bend the hose of the mixing and conveying pump to prevent the hose from exploding. This is also one of the reasons why the mixing and conveying pump blocks the pipe. When the pipe is blocked, when the pipe is pumped after treatment, the end of the soft joint will swing rapidly, the concrete may be sprayed instantly, and the staff should not be close to the hose.

3. Pay attention to stand at the corner of the building when operating the concrete mixing pump hose, because the hose is soft, it may shake or spray concrete when pumping concrete, which may lead to the danger of falling.

• What are the reasons of the boom pump truck is easy to block the pipe
• There are many BUGs in the truck mounted boom pump , please be careful when purchasing!