Concrete pump truck has been widely used in concrete pouring construction.The advanced technology of the equipment and the complexity of maintenance determine that higher requirements should be put forward for its use,maintenance and management personnel.In order to ensure that the concrete pump truck can reach the specified technical state during operation,reduce the maintenance cost and improve the reliability and service life,some safe operation methods of the pump truck are formulated.

　　The safe operation process of concrete pump truck must comply with the general regulations and relevant regulations of concrete pump truck.Please operate correctly.

　　1.The place where the pump truck is in place must have a flat ground without high-voltage wires;

　　2.After the pump truck is in place,the legs shall be supported and the fuselage shall be kept balanced.When distributing materials,the inclination of the fuselage shall not be greater than 3 degrees;

　　3.After completion,please turn on the lights of the pump truck to avoid collision;

　　4.The operators of the pump truck can only work after professional training,and operate in strict accordance with the requirements of the instructions and safe operation procedures of the concrete pump truck;

　　5.Strict repair and maintenance system,vehicles,pumping pumps and boom should be in the charge of special personnel,otherwise there may be damage to the appearance and image and loss caused by poor maintenance.

• How to locate concrete batching plant management
• precautions and maintenance of Concrete Truck-mounted Boom Pump